How to Fix a Lawn Mower

Lawn mowers are a great way to keep your yard looking clean and healthy. Sadly, lawn mowers don’t last forever. Eventually, you might have to fix your lawnmower if it breaks down. How can you determine what’s wrong with the lawn mower? How do you find out how to fix a lawn mower? How do you know if it’s a major or minor repair? How do you fix a lawn mower when it doesn’t start? How can you save yourself from an expensive mechanic? How do you use tools on a lawnmower? How much time will the repairs take? How much money should I expect to spend on repairs?

If you want to keep your garden looks awesome, you’ll need lawn mower repair skills. If you have a lawnmower, here are some most common problems and how to fix them.

Also Read: 10 Best Lawn Mower for Steep Banks – Get the All-Time Best Suggestions

1. What to Do If Your Lawn Mower Won’t Start

Examine the following areas if your lawnmower will not start:

  • Fuel: An empty gasoline tank will not allow your lawn mower to operate. Similarly, if the fuel is more than 30 days old, remove it before cleaning the carburetor.
  • Gas tank: Look for any leaks in the gas tank. If you can, seal any leaks that you discover; but, if not, replacements are often accessible on online lawn mower repair sites.
  • Battery: Batteries are used in just about every piece of modern technology, from automobiles to computers and cell phones. Lawnmowers also require batteries to work. Their batteries will eventually wear down and need replacement as they lose their ability to store or transport a charge, just like cars.
  • Air filters: We suggest changing the air filter on your lawnmower every time you perform a cleaning to guarantee optimum performance. Dirty air filters clogged with dust and grime can impede airflow and prevent your lawnmower from starting up. Remove the blocked air filter and discard all of the built-up debris if it is dirty. If it’s too damaged to clean and reuse, replace it with a brand-new one.
  • Spark plugs: Spark plugs that are loose, filthy, or disconnected may be preventing your mower from starting. Before attempting to start your machine, double-check that your spark plugs are secure, clean, and properly aligned. Replace worn and faulty spark plugs as they’re prone to wear and tear.

2. Lawn Mower That Will Not Shut Off Until the Spark Plug Is Removed

A mower that won’t start is inconvenient, but a mower that will not turn off maybe be as terrible. Two factors usually cause this problem.

First, check to see whether the “kill” or ground wire is connected. Second, check for faulty connections in the ignition switch.

Check your ground wire first. Make sure it is connected to the area it “grounds” to and that it is intact.

If your ground wire is good, check the connection between the “B” and “S” terminals on your ignition switch with an ohmmeter. If it isn’t, replace your ignition switch to get things going again.

3. Gasoline-Powered Lawn Mower That Uses Too Much Gas

 ike runners who have completed a full marathon without having a bottle of water, Lawnmowers are not meant to consume gasoline in such quantities. A blocked air filter is typically the first suspect if your lawnmower does this.

Dust, pollen, leaves, dust from the garden center, and other debris collect on your mower’s air filter over time. This causes your mower’s engine to work harder, requiring it to burn more gasoline in order to perform its normal function. Clean or replace your air filter if it has been exposed for an extended period of time.

4. The first stage is to determine whether or not the rope is too tight or stuck

The most typical cause of this problem is an engaged flywheel brake. Make sure the flywheel brake is wholly disconnected and does not press against your mower’s handle before you pull the starter rope.

If the blades aren’t causing the problem, inspect them. They could be touching the ground or grass or debris clogging them, which prevents the engine from starting.

If the mower doesn’t start, there are a few things you can try. Locate the spark plug and remove it, then clean the blades of any grass or dirt fragments and try again.

5. Overheating Lawnmower

When your lawnmower becomes too hot to use during mowing, please don’t ignore it simply because it still works. Continuously utilizing it in this manner may exacerbate the situation needlessly.

If your mower is overheating, it’s probably because the air filter is clogged. You might also have a broken blade or debris in the cooling fins of your engine block. To solve this problem, clean out all obstructions, replace the blades and check that you are using gasoline with no more than 10% ethanol content.

Also Read: Top 10 Lawn Mowers | Best of 2021 that Your Garage is Missing

6. Smoke Is Coming From the Lawnmower

In this case, you have a gas leak. Your mower is probably using too much gasoline or a rupture in the tank venting vapors. If boiling gasoline has accumulated on your engine head, it could be smoking as well. In either scenario, stop operating your lawnmower and have it towed away from combustible objects before it explodes. To fix this problem, replace your fuel-cutting unit with an updated version that doesn’t leak or vent gasoline.

A smoking lawnmower seldom indicates a significant issue. If it is already affecting the operation of your mower, however, Lawn mower repair professionals recommend that you call one immediately.

7. Lawnmower Has a Rattling Noise But Not When the Blades Are Engaged

A loose blade might be hitting your mower’s housing, which would cause it to rattle. Check each of your blades and replace any that appear damaged or excessively worn. You can also oil or grease them to prevent further vibration and intimidating issues.

8. Lawn Mower With Slower Speeds

A reduction in the top speed that your lawn mower can attain may indicate that debris has collected on its underside or that there are issues with the air cleaner, fuel system, fuel filter, or carburetor ignition. To repair this problem, you will need to clean the underside of your mower and replace damaged parts. If you can’t resolve the case, your best bet is to have a professional service person diagnose and repair it for you.

9. Lawnmower Is Leaking Oil

Oil leaking from a lawnmower is probably coming from the engine or motor housing because it has turned over and breached their oil sumps. Check them for damage and repair as needed before applying fresh oil to the inner motor parts.

10. Lawn Mower Is Squealing or Stalling

Squealing or stalling can result from an engine that is over-heating, overloaded with grass clippings, or lacks enough oil. If it’s due to insufficient oil, you should replace your mower’s oil before restarting it. Clean its blade and housing to reduce overloading, then rerun the mower.

11. A Lawnmower That Doesn’t Cut Grass

Grasses that are too long or soggy, on the other hand, prevent a lawnmower from cutting grass.

In the beginning, keep in mind that only do mowing when the lawn is dry. It’s never a good idea to cut wet grass because it can block your machine.

Second, the grass may be too long for your lawn mower’s cutting height. Before you begin cutting overgrown grass, raise the deck’s height above its regular settings.

Try to go at a slower speed when mowing tall and lengthy grass. Make sure to clean out the grass, leaves, and other debris that may accumulate beneath the deck while you mow to ensure that your mower runs smoothly.

12. Lawnmower With An Irregular Mowing Problem

The most common reason for uneven cutting is that the lawn has not been mowed in a long time. It might be due to:

– The wheels are out of alignment.

– The blades need to be sharpened or replaced. You can fix this by removing the blade or contacting a lawn mower repair professional.

– The grass is too tangled, or thatch has built up around the blade’s shaft.

13. Mower That Vibrates Too Much

– The wheels are out of balance: Your lawn mower may be vibrating because one or more of its wheels isn’t securely attached to the axle. This is a simple fix that an average homeowner can do.

– The blade has become unbalanced: If you notice one side of your lawnmower cutting significantly slower than the other, the blade is probably unbalanced. You’ll need to replace it to fix this problem.

– There is a loose part: If one of the lawn mower’s wheels looks like it is wobbling, you should check to see whether its axle bolt has become loose and tighten it up if necessary. The same goes for any other components that look like they are loosened, like the lawn mower’s handlebars.

– The blades are badly damaged: Dull or bent blades will create too much friction on your lawnmower’s deck, which will cause it to vibrate. Replace them to fix this problem. You can sharpen them yourself or have a professional do it for you.

– The engine is misaligned: If your lawn mower’s engine and cutting deck aren’t properly aligned, the blade will rub against the deck and overheat. This, over time, can create a bad smell. You’ll need to replace or adjust both parts to fix this problem.

– One of its wheels is broken: If one of your lawnmower’s wheels seems to be wobbling, it might have cracked or broken. It would be best if you replaced it as soon as possible.

– The engine is flooded: If your lawn mower is flooding after you’ve tried restarting it for the second time, check and see whether the air filter and the carburetor are clean and free of debris. If they’re not, clean them and start the lawn mower again.

– Carburetor problems: A clogged or dirty carburetor is a common reason for a lawn mower to flood. You’ll need to remove any debris from its bowl and adjust the float level if it’s too low or high.

– The blade is bent or dull: If your lawnmower seems to be working too hard, the blade might have become bent or dull. You’ll need to discard it and replace it with a new one.

– The pull cord is broken: Check if the pull cord’s housing is cracked or broken, which could cause it not to function correctly.

The bearings are broken: If the lawn mower vibrates when you try to start it up or run roughly, its bearings could be broken. You’ll need to replace them to fix this problem.

– Your engine has become unbalanced: When your lawn mower vibrates excessively while in use, the blades may be out of alignment. You can quickly fix this problem by checking and adjusting the blade’s position.

– The engine is improperly mounted: If your engine seems to be vibrating on its mounts, check whether they are loose or securely attached. Tighten them if necessary.

Advance tip: Hard things, such as boulders and roots, should be avoided while mowing your lawn. These can damage various components of your lawnmower, necessitating repairs or even replacements.

Leave a Comment